Oxy Arc Nozzle

Hakan Hydraulic

OXY ARC NOZZLE
The CanCut™ CC series nozzle is designed for oxygen cutting machines. However, it is suitable for manual heating operations and has a high performance on the torch.

CC SERIES TECHNICAL FEATURES:
✧ Minimum slag formation occurs.
✧ It performs narrow area cutting and cutting round edges.
✧ Mixing of gases outside the nozzle ensures longer life and cooler operation.
✧ Gases do not mix into the nozzle, so no backfire safety is needed.

 

 

                                          PRODUCT FEATURES
  MODELS
YIELD CC90 CC110 CC130 CC150
THICKNESS 203mm (8") 254mm (10") 380mm (15") 510mm (20")
CUTTING WIDTH 4.70mm - 5.33mm (0.185" - 0.210") 5.08mm - 5.59mm (0.200" - 0.220") 5.33mm - 5.84mm (0.210" - 0.230") 5.84mm - 6.86mm (0.220" - 0.230")
CUT SPEED 127 - 203 mm/min (5" - 8"/min) 152 - 254 mm/min (6" - 10"/min) 254 - 356 mm/min (10" - 14"/min) 152 - 254 mm/min (6" - 10"/min)
CONSUMPTION  
CUTTING OXYGEN  
PRESSURE 8.6 bar (125 psi)
FLOW RATE 24.57 Nm³/h (870 ft³/h) 36.81 Nm³/h (1,300 ft³/h) 55.78 Nm³/h (1,970 ft³/h) 62.58 Nm³/h (2,210 ft³/h)
HEATED OXYGEN  
PRESSURE 0.5 bar - 1.0 bar (7-15 psi)
FLOW RATE 6.99 - 12.51 Nm³/h (247 - 442 ft³/h)
FUEL  
PRESSURE 0.5 bar - 1.0 bar (7-15 psi)
FLOW RATE 9.28 - 17.21 Nm³/h (328 - 608 ft³/h)
DESIGN  
STRUCTURE 2 pieces (injector - sheet)
MATERIAL Brass, Bright Nickel / Alloy plated
NOISE ( 5ft )1,525mm 105 db
FUEL Natural gas, Propane, Propene
HEIGHT ADJUSTMENT  115 - 205mm (4,5"- 8") from the surface of the material to the cutting tip

+90 (326) 755 4848

info@hakanhidrolik.com.tr

Quick Request Form

Whatsapp ✆ +90 (536) 138 68 15

SEND